Megadeath - Death by Design Cover Art Hueforge
Print Profile(1)
Description
This is the cover to the graphic novel “Megadeth - Death by Design” created in Hueforge. The original stl and design is for 200x200 but the 3mf is scaled down to 133x133. I used a 0.2 nozzle for the print on a Bambu Lab P1P. See below for the Hueforge describe output.
Project: Megadeth Death by Design.hfp
Print at 100% infill with a layer height of 0.04mm with a base layer of 0.16mm
The Model is 200x200mm in size
You may print at higher layer heights below the Base Thickness of 0.32mm
The Max allowed Thickness is 2.72mm and the Actual Thickness is 2.72mm
Filaments Used:
#000000 PLA BambuLab Basic Black Transmission Distance: 0.6
#ff0000 PLA+ Ankermake Red Transmission Distance: 5.6
#906c3f PLA+ IIID Max Coyote Brown Transmission Distance: 3.6
#ffaa00 PLA+ JAYO Orange Transmission Distance: 5
#ffff00 PLA+ JamG Yellow HE Transmission Distance: 10
#ffffff PLA BambuLab Basic Jade White Transmission Distance: 5
#c4cbb1 PLA+ IIID Max Vanilla Cream Transmission Distance: 7.8
#9b8b39 PLA+ Sunlu Light Gold Transmission Distance: 3
This print uses 8 unique filaments
Swap Instructions:
Start with Black
At layer #22 (1mm) swap to Red
At layer #23 (1.04mm) swap to Coyote Brown
At layer #33 (1.44mm) swap to Orange
At layer #45 (1.92mm) swap to Yellow HE
At layer #49 (2.08mm) swap to Jade White
At layer #60 (2.52mm) swap to Vanilla Cream
Border Only Colors from here until the end.
At layer #66 (2.76mm) swap to Light Gold for the rest.
The hardcover or box set can be found online through various retailers.
Celebrating four decades of Dave Mustaine's legendary band, MEGADETH, this omnibus edition is 35 short stories inspired by 35 of MEGADETH'S greatest songs of all time. Songs adapted include "Hangar 18" by METALOCALYPSE creator Brendon Small, "Rattlehead" by Brooklyn Gladiator creator, Dan Fogler. Other stories adapted by Roche Limit creator, Michael Moreci and HACK/SLASH creator Tim Seeley as well as many, many more.
License
Comment & Rating (0)