MFT - Magnetic Fidget Toy (6x3mm magnets)
Print Profile(2)
Bill of Materials
Description
Boost Me (for free)
If you enjoy my designs please consider giving a boost! ❤
Magnetic Fidget Toy
Uses total of 8 6x3mm magnets, 4 for each side.
Use N52 magnets ! Standard N35 magnets are not strong enough.
Printing:
0.2mm layer height, 3 walls, 5 top 4 bottom layers, 15-20% infill
Print with PLA
no supports needed
You need a well calibrated printer for the magnets to go in smoothly. They should go in with a little force.
Assembly:
Insert the magnets to the top plate.
Check if magnets can be pressed to the lower body.
If everything goes together correctly, remove the top plate, add few drops of glue and press together.
Repeat for other half of the fidget, minding the magnets polarity.
If you like this fidget, try my other designs.
Magnetic Fidget Slider (6x3mm magnets)
Magnetic Fidget Slider - Bigger Version
Membership
Commercial License
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (16)