Print Profile(5)
Description
Membership
Want to sell prints of my designs? Click Join to unlock the Commercial License and take your 3D printing business to the next level.
Boost Me (for free)
Enjoy this design? Give it a Boost so I can keep creating more awesome projects for you and the community. Your support makes a difference—thank you!
Embark on a journey to a galaxy far, far away with this coaster inspired by those available from Oga's Cantina on Batuu Star Wars: Galaxy's Edge – the perfect companion for your favorite drinks! Whether you lean towards the light or embrace the dark side.
Overview
This set of four coasters is inspired by the limited edition designs, which are no longer available from Oga's Cantina on Batuu in Star Wars: Galaxy's Edge at either Disney World or Disneyland California. This set of four can be printed alongside a core set of 6, and complemented by the coaster display stand. Both other models are available in my profile.
Parts count: 6
Key Features
- Inspired by the iconic Oga's Cantina at Star Wars Galaxy's Edge.
- Dimensions: 100mm in diameter, 4mm thick.
- 4 color prints.
- Pre-sliced.
- Tuned print profiles.
- Provision to add no-slip feet to the back.
Printing Details
Recommended filaments:
- eSun PLA+ Cold White
- eSun PLA+ Black
- eSun PLA+ Bone White
- eSun PLA+ Fire Engine Red
Hotend: 0.4mm Hardened Steel
Print time: Each coaster typically prints in about 45-75 minutes
Printing Tips:
- Most coasters share the same four colors: White, Black, Dark Red/Maroon, and Tan.
- The Cantina Code coaster uses Light and Dark Purple, as well as Tan.
- The Star Liner coaster uses Grey and White.
- Printing with an AMS is necessary for optimal results.
- The print profiles automatically assign colors to the coasters. Before printing, ensure that you've placed your filament in the corresponding slots of the AMS according to the 3MF file.
- Ensure your print surface is impeccably clean before printing a coaster, especially for those with predominantly dark colors on the face. Otherwise, any dirt, residue, or filament wisps may become embedded in the print. Consequently, I do not recommend using glue.
Assembly
Added to the files is a jig which helps with even placement of non-slip Silicone Pads (6 x 2mm). Which can be purchased on Amazon
May your libations be as legendary as the tales told in the Outer Rim. May the Force be with you!
Boost Me (for free)
Enjoy this design? Give it a Boost so I can keep creating more awesome projects for you and the community. Your support makes a difference—thank you!
Membership
Want to sell prints of my designs? Click Join to unlock the Commercial License and take your 3D printing business to the next level.
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (266)