Antifa Keychain (Antifa Makers keyring)

FEEL FREE TO COPY AND EDIT!

I needed a keychain to hold an NFC tag for a business card, so I created this one.

The model I found online wasn't suitable for printing on my Neptune 4 Pro without an AMS, so I redesigned it to allow single-color printing followed by painting. However, it's designed for three-color printing (white, red, and black) if you have an AMS.

To insert the NFC tag, pause the print on the 3rd layer, adhere the label, and then resume printing as usual.

I used a 2cm by 1cm tag, and it worked flawlessly. 

“I wanted a keychain to hold an NFC tag for a business card, so I made this one.”

The model I found online wasn’t ideal for printing on my Neptune 4 Pro without an AMS (Automatic Material System), so I designed it to be printed in a single color and then painted. However, it was originally created as a model for 3-color printing if you have an AMS (white, red, and black).

To insert the NFC tag, pause the print at the 3rd layer, stick the label, and then resume printing normally.

I used a 2cm by 1cm tag, and it worked perfectly.”