Screw Saver Grip (TPU)
Print Profile(1)
Description
Congratulations on finally discovering FunOrNothing :)
📢 Screw Saver Grip – TPU Screw Holding Tool
Honestly, I designed this because I kept losing tiny screws.
Just yesterday, I dropped a screw while working on my printer… and couldn’t find it again. 😅
If you’ve ever tried to install or remove tiny screws during printer maintenance, you’ll know the struggle:
- Screws too small to hold properly
- Screws falling off the driver tip
- Screws vanishing forever on your workshop floor
This Screw Saver Grip solves that problem.
How it works:
- The tool is fully 3D printed from TPU.
- One end grips your hex driver shaft snugly.
- The other end grips the screw head, holding it firmly in place.
Why it's useful:
- During installation:
You can pre-load the screw into the tool, fix it onto your driver tip, and guide the screw precisely into place – without using your fingers to hold it. - During removal:
As you unscrew, the TPU grip catches the screw before it falls.(When the screw is slightly loose, slide the grip to catch the screw head.) You can safely finish removing it without worrying about dropping it. - No more dropped screws. No more frustration.
- You can always keep it attached to your driver without having to store it separately.
About printing:
95A TPU is recommended.
Boost Me (for free)
Your boost helps me spend more time creating better designs.
And don’t forget to check my other models — you might discover something useful! 😊
Although it may look very simple, it is the result of many tests to arrive at the optimal design.
Haven't tried TPU printing before? This is a model with a very low chance of printing failure. Don't worry.
Don't have TPU and need to buy a new one? This model only takes 1g to print, but it offers much more value than 1kg.
Probably one of the smallest models on MakerWorld… but possibly one of the most useful too.
It takes only 15 minutes to print two models, but they will help you for life.😁😉
_________________________
You may also like…
https://makerworld.com/en/models/1523280-radius-gauge-radgauge-nano#profileId-1596550
Hope you Enjoy this model.
As always, I welcome your feedback.
Click to Check out FunOrNothing's interesting designs.
Boost Me (for free)
Your boost helps me spend more time creating better designs. And don’t forget to check my other models — you might discover something useful and fun! 😊
You can sell printed products of my models by joining FON Membership, please sign up for the membership below. Please do not become a thief.
Membership
The best way to support my work is to join the FON membership. You can be my Supporter, Seller, or Partner. If you join the membership, you can communicate more closely with me through Discord.
You can be a friend who encourages me by buying me a cup of coffee.
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (2)