LED Name Lamp SAMIRA

Description

LED name lamp SAMIRA (Super Mario letters)

Each letter comprises a colored section and a cover.

Utilize solid colors for the base and white for the top if RGB LEDs are employed.

The letters are approximately 15.0 cm tall and 5 cm deep.
The white cover is 0.6 mm thick, maintaining a 0.2 mm gap from the letter.

I employed Uhu Allplast adhesive to assemble the letters. Generally, no adhesive is required for the inserts.

In essence, any LED strip is suitable. This is adhered to the letters' outer walls or, alternatively, to the base. I recommend LED strips with 60 LEDs/m.

For assistance or a custom name, simply contact me.

----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------

LED name lamp SAMIRA in Super Mario font

Each letter consists of the colorful part and a cover.

Use solid colors for the lower section and white for the upper section if RGB LEDs are to be used.

The letters are approximately 15.0 cm high and 5 cm deep.
The white cover is 0.6 mm thick and has a 0.2 mm clearance from the letter.

I used Uhu Allplast adhesive to bond the letters together. Typically, no adhesive is needed for the inserts.

Essentially, any LED strip can be used. This is affixed to the letters' exterior walls or, optionally, to the base. I recommend LED strips with 60 LEDs/m.

For support or a different name, feel free to contact me.