Search models, users, collections, and posts
Print Profile(1)
0.08mm layer, 2 walls, 100% infill
Designer
4.9 h
1 plate
Open in Bambu Studio
Boost
85
209
3
0
83
53
Released
Description
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
The Model is 160x200mm in size
You may print at higher layer heights below the Base Thickness of 0.48mm
The Max allowed Thickness is 2.24mm and the Actual Thickness is 1.84mm
Filaments Used:
#080a0d PLA PolyLite Black Transmission Distance: 0.3
#9b9ea0 PLA BambuLab Matte Ash Gray Transmission Distance: 1.5
#00b1b7 PLA BambuLab Basic Turquoise Transmission Distance: 1.4
#ffffff PLA BambuLab Basic Jade White Transmission Distance: 5
This print uses 4 unique filaments
Swap Instructions:
Start with Black
At layer #7 (0.64mm) swap to Ash Gray
At layer #11 (0.96mm) swap to Turquoise
At layer #16 (1.36mm) swap to Jade White for the rest.
License
This user content is licensed under a
Creative Commons Attribution-Noncommercial-Share Alike
Comment & Rating (3)