Laptop stand
Print Profile(1)
Description
I created this modular laptop stand. If you have a small laptop, you can print only the main body and the stabilizers with the M6 fixing screws, the stand measures 17 cm. There are two types of stabilizers: the individual ones allow the two supports to be movable, the long one will make the stand a single piece, with a width of 17 cm; it is up to your use whether to use one or the other. If, however, you have a large laptop, in the third print plate there are two extensions that, when combined with the main body, will make the stand a total of 25 cm. In this way, those who have an A1 mini will be able to print a large, modular laptop stand. Assembly is very intuitive, I have included step-by-step guide photos.
January 2026
I modified the model's fastening by creating M6 threads in the holes and designing screws to assemble everything. Aesthetically, the model remained unchanged, now the screw fastening is simpler and optionally detachable.
A tip: pass each screw through each threaded hole individually, both from one side and the other, before assembling the model, otherwise the screws will be difficult to turn. I designed the screws with fairly tight tolerances, so running them through all threads a couple of times will help eliminate any excess material in the threads to ensure smooth movement.
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (3)