Search models, users, collections, and posts
Bambu Lab P1P full printable enclosure (door with window Remixe)
Remixed by
IP Report
Print Profile(1)
0.2mm layer, 2 walls, 15% infill
3.8 h
1 plate
Open in Bambu Studio
Boost
25
57
3
2
97
24
Released
Description
I made a remix of the Bambu Lab P1P full printable enclosure mod
-you can put an acrylic or plexiglass pane in the door
-I created a frame with a hinge and installed it on my P1P
-the bolts from the original model are compatible with these hinges
-glue the frame parts to the pane and insert the door
-you need a pane with the dimensions 356x309x3
here is a shop (for europe)
https://www.plattenzuschnitt24.de/PLEXIGLAS-XT-3mm-klar.html
Print parts
| part names | pieces |
| door_left_top.3mf | 1 |
| door_left_bottom.3mf | 1 |
| door_right_top.3mf | 1 |
| door_right_bottom.3mf | 1 |
| door_middle_up_and_down.3mf | 2 |
| DoorBolt .3mf | 2 |
This remix is based on
License
This user content is licensed under a
Creative Commons Attribution-Noncommercial-Share Alike
Comment & Rating (3)