american flag punisher skull keychain unneeded AMS
Print Profile(2)
Description
this is a keychain that is about 4 in long by 2.7 in wide. it is 4 mm tall. I made a extra model without the keychain hole if you wanted to just put it on your wall or something like that. I also mad the keychain hole large enough to tie a string and hook it up to your car (¼ in diamiter hole). This is still printable without an AMS and no glue needed. if you don't have an AMS you will have to pay attention to which layer it is on. if you have a 0.4 nozle you will need to pause the print, go to the filiment and unload it, and switch the color from blue to white on layer 11, on 18 you will need to switch the color from white to red the same way you did before. (you will not be able to change the filiment settings). The other option if you don't have an ams is you can download my non ams model. It should pause the print at the beginning of the specific layers( 11 and 18).
SWAP INSTRUCTIONS:
- swap from blue to white as layer 11 begins
- swap from white to red as layer 18 begins
hope you enjoy and let me know if there are any problems. please leave a comet and let me know what you think.
enjoy
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (27)