StarWars Inspired Wearable Greeble - Rebel 1

Rebel 1 - Customizable Wearable StarWars Inspired Greeble.

Make your own customizable wearable Star Wars Inspired  Rebel 1. I split this into multiple profiles to be able to make it easy to print the lights on the greeble in what ever color  you would want. The light pieces are printed separate to reduce waste. 

To customize the Greeble with Aurebesh you will have to download the available font pack that you like. There are a lot available on the internet. There are also directions on how to make that available in Bambu Studio for use on Mac and Win.

This will require 3 LEDS for uniformed brightness, one of the LEDs will use the light housing that can be glued in. For the one in the photos I used a 3mm Diode Holder/Mount. You can use whatever you want as long as the threads are <6.5mm. If you use the same Diode Mount that I did, please be aware that. you may need to cut the end off because of the depth. That was why I included a printable version which can be glued in.

There are 3 profile plates:

• Blank - So that you can add your OWN Aurebesh (or any font) name to the plate
  • Top and Bottom
• Beans - Which has the word Beans in Aurebesh
  • Top and Bottom
• Lights - So you can print the Lights in a different filament (Translucent preferred if you are making the electronics)

The base has to cut outs to pressure fit for magnets.

• 18mm Craft Magnets for attaching to clothes

If you want to light it up:

• CR2032 Battery
• CR2032 Lilypad
  • Any of these should work here. They typically sell in sets 5-10 for the cost to buy 2 individually.
  • These are the exact ones I use. HiLetgo 5pcs Lilypad Coin Cell
• OPTIONAL: 3mm diode holder
• 3v LEDs (can be prewired if you dont want to solder) 

Instructions will be uploaded shortly, but a walk through reel will be on my IG, link in profile.