Pool Accessory Holder Set

Hello everyone!

We have quite a lot of accessories around our pool – and eventually, a proper storage solution was needed. So I designed some practical holders:

• a holder for poles (bottom right print plate, 2 pieces per pole etc are sufficient)
• a hook with customizable sign for brushes, skimmers, or the pool cleaner (the two upper print plates, one per brush etc is sufficient)
• as well as a cover support (bottom left print plate, 3 pieces are sufficient)

All parts can be easily attached to the pool tubes with cable ties – super uncomplicated.

What do the pictures show?

• Picture 1: The overall overview – all parts in use.
• Picture 2: Brush and cleaner hang on the hooks with labels. (The small signs are printed separately and attached with super glue – saves printing time.)
• Picture 3: A single hook for the cleaner.
• Picture 4: The holders are for 3 cm thick tubes – suitable e.g. for our EXIT pool.
• Picture 5: This is how you can attach several holders on top of each other to save space.
• Picture 6: The holders for the cover – we use three of them. They even survived a whole winter without any problems.
• Picture 7: For orientation – here you can see the objects distributed on the print plates.
• Picture 8–10: This is how you change the text on the signs:
  1. Click on “Objects” on the left with the filaments.
  2. Then select “Text-Shape”.
  3. Click on the text icon in the top right corner and simply enter the desired text below (e.g. “Skimmer”, “Cleaner”, etc.).
• Picture 11: Before attaching to the pool, I recommend applying double-sided adhesive tape to the inside of the printed parts – the cable ties alone do not always reliably hold heavier items such as the cover.

Have fun reprinting and attaching!
Tim