Lemmy3DPrint

cover

IMG_0124.JPG

IMG_0122.JPG

IMG_0120.JPG

IMG_0119.JPG

IMG_0118.JPG

IMG_0117.JPG

plate_1.png

2025-07-26_6eec5270af8258.jpg

<ul><li>Höhe ca 100 mm kann aber skaliert werden</li><li>0,16 mm Schichthöhe</li><li>0,4 Düse</li><li>Saubere Druckplatte</li></ul>

<ul><li>Height approx 100 mm but can be scaled</li><li>0.16 mm layer height</li><li>0.4 nozzle</li><li>Clean print bed</li></ul>

0.16mm layer, 2 walls, 9% infill

ME3D.printing

mouth-necklace.PNG

IMG_4673.jpeg

IMG_4677.jpeg

0.2mm layer, 3 walls, 9% infill ADD mouth and necklaceThis print profile already added support&nbsp;Color-enhanced using Bambu AMS! A second color is added only to the mouth and necklace, making the model pop while keeping everything else in a solid base color. Great for simple yet eye-catching multi-color prints. This print profile is designed for direct coloring by separating model parts, so no supports are used in order to preserve clean color boundaries. As a result, it might be slightly more difficult to remove parts cleanly in areas with color transitions. However, an extra bottom layer has been added to ensure smoother sanding and to avoid issues after printing.

0.2mm layer, 3 walls, 9% infill ADD mouth and necklace

Only-mounth.PNG

IMG_4676.jpeg

IMG_4674.jpeg

0.2mm layer, 3 walls, 9% infill Add-Mouth color  This profile adds a second color specifically to the mouth area using Bambu Lab’s AMS for multi-color printing. The rest of the model remains in the base color, creating a subtle yet effective highlight. Designed for seamless multi-color transitions with AMS.&nbsp;Note: This print profile is designed for direct coloring by separating model parts, so no supports are used in order to preserve clean color boundaries. As a result, it might be slightly more difficult to remove parts cleanly in areas with color transitions. However, an extra bottom layer has been added to ensure smoother sanding and to avoid issues after printing.

0.2mm layer, 3 walls, 9% infill Add-Mouth color

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.

This user content is licensed under a Standard Digital File License.

Duck of the Darkness – Die dunkle Ente des Rock ’n’ Roll&nbsp;Vorsicht!!! Hier wurde das Teufelszeug KI zur Hilfe genommen inklusive Meshmixer. Wollte es nur erwähnen, bevor die KI-Trolle wieder kommen.&nbsp;„You can’t kill rock and roll… but you can definitely quack it!“ – hätte Ozzy wohl gesagt, wenn er diese Ente gesehen hätte.Diese Duck of the Darkness ist nicht einfach irgendeine 3D-gedruckte Ente. Nein – sie ist die Ente der Finsternis, inspiriert vom Fürsten des Chaos höchstpersönlich, Ozzy Osbourne. Mit ihrer wilden Mähne, dem leicht wahnsinnigen Blick und einem Hauch von Bissigkeit könnte man fast meinen, sie springt gleich ins Wasser und ruft: „All aboard the Crazy Train!“&nbsp;WICHTIG ! Die Ente ist keine genaue Abbildung von Ozzy und am Shirt steht daher auch nur “OZY ” Technische Details:<ul><li>Größe: ca. 100 mm hoch (natürlich skalierbar – von Gummiente bis Dark-Lord-Size).</li><li>Material: PLA CF Dark Green – weil Schwarz zu langweilig und bunt nicht düster genug wäre.</li><li>Schichthöhe: 0,16 mm mit 0,4 mm Düse (wer’s feiner will: spielt mit variablen Schichthöhen, ihr Kreativen!).</li><li>Support: Mit etwas Fingerspitzengefühl zu entfernen – keine rohe Gewalt, sonst wird die Ente sauer.</li><li>Saubere Druckplatte = Pflicht, sonst wird’s nix mit der Finsternis.</li></ul>Hinweis: Wenn dir meine Arbeit gefällt, freue ich mich über Feedback, Likes oder einen Boost – das gibt der Ente die Energie, die sie braucht, um weiter durch die Dunkelheit zu watscheln.„I’m the Prince of Darkness… and now also of Duckness!“ – Duckzy Osbourne&nbsp;

Duck of the Darkness – The Dark Duck of Rock ’n’ Roll&nbsp;Caution!!! The evil AI stuff was used here, including Meshmixer. Just wanted to mention it before the AI trolls come again&nbsp;“You can’t kill rock and roll… but you can definitely quack it!” – Ozzy probably would have said if he had seen this duckThis Duck of the Darkness is not just any 3D printed duck. No – she is the Duck of Darkness, inspired by the Prince of Chaos himself, Ozzy Osbourne. With her wild mane, slightly insane gaze, and a touch of bite, one might almost think she's about to jump into the water and shout: “All aboard the Crazy Train!”&nbsp;IMPORTANT ! The duck is not an exact likeness of Ozzy, and therefore the shirt only says “OZY ” Technical Details:<ul><li>Size: approx. 100 mm tall (naturally scalable – from rubber duck to Dark-Lord-Size)</li><li>Material: PLA CF Dark Green – because black would be too boring and colorful not gloomy enough</li><li>Layer height: 0.16 mm with 0.4 mm nozzle (if you want it finer: play with variable layer heights, you creatives!)</li><li>Support: To be removed with a bit of finesse – no brute force, otherwise the duck will get angry</li><li>Clean print bed = mandatory, otherwise you won't get darkness</li></ul>Note: If you like my work, I'd appreciate feedback, likes, or a boost – that gives the duck the energy it needs to keep waddling through the darkness“I’m the Prince of Darkness… and now also of Duckness!” – Duckzy Osbourne&nbsp;

Print Profile(3)

Description

Comment & Rating (147)

License

Related Models