Moon-light Ravens

Hi everyone!

I have decided to uploaded something a little darker and moodier to MakerWorld – a gothic-style raven pair, perched beneath a full moon with a painterly, ink-drip vibe. 

Designed using Hueforge and printed entirely in filament (no painting needed), this piece really pops with its deep blacks, splashes of crimson, and cloudy greyscale background.

Perfect for gothic decor, Halloween displays, or just fans of dramatic art
 

• Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
• The Model is 112x143.99mm in size
  You may print at higher layer heights below the Base Thickness of 0.48mm
  The Max allowed Thickness is 2.56mm and the Actual Thickness is 2.16mm
• Filaments Used:
      #000000 PLA+ Sunlu Black  Transmission Distance: 0.6
      #d22332 PLA+ Sunlu Red  Transmission Distance: 6
      #0041cc PLA+ Sunlu Blue  Transmission Distance: 4
      #ffffff PLA+ Sunlu White  Transmission Distance: 8.5
  This print uses 4 unique filaments
• Swap Instructions:
      Start with Black
      At layer #10 (0.88mm) swap to Red
      At layer #14 (1.2mm) swap to Black
      At layer #15 (1.28mm) swap to Blue
      At layer #16 (1.36mm) swap to White for the rest.

Thanks as always for the support!

Remember if you want to resize then make sure you only change the X and Y (make sure the Z stays at 3.2mm as changing this will affect how the print turns out)