Allen Key Head Covers M3 - M24 (2mm - 14mm Allen Key)

Allen key screw covers in various sizes:

M3 → 2mm Allen key
M4 → 2.5mm Allen key
M5 → 3mm Allen key
M6 → 4mm Allen key
M8 → 5mm Allen key
M10 → 6mm Allen key
M12 → 8mm Allen key
M14 → 10mm Allen key
M16 → 10mm Allen key
M20 → 12mm Allen key
M22 → 14mm Allen key
M24 → 14mm Allen key

Allen key sizes may vary depending on the head type (cylinder head, countersunk head, etc.)
The depth may also vary; if the pin for the Allen key hole is too long and the cover sits too high, simply shorten the pin with a nail file or similar.

Known issue: if the Allen key fitting shows significant wear, the caps may not hold. Either use adhesive or choose a different size or scaling.

→ Therefore, print only one cover first to check if it fits 😉

To find the correct cover in the slicer: simply switch from Global to Objects in the process; the covers are listed there and named according to size. They can be selected there and will be marked on the printing bed (see image in the preview).