The Key - Puzzle Box

I took the original “The Key - Puzzle Box” from Thingiverse and scaled it to 150% to hide a money gift. And I reworked the STL files into a ready to print model. I printed the mechanical parts inside with PETG and the rest with PLA

The original is by LeisureLuke, my remix is based on https://www.thingiverse.com/thing:4685893 

A description can be found under the Thingiverse link mentioned above

*** Update Note *** The last profile was incomplete. I have corrected it now!

Description (Original)

Puzzle Box is an original design by Leisure Luke.  It's a 7 Piece + 2 BONUS Pieces set that is EASY TO PRINT!  No Supports Needed. Print it in PLA!  Parts without squiggly springs can be PETG or PLA. 0.1mm tolerance for all non-sliding parts.0.2mm tolerance for sliding parts0.4mm tolerance for loose key eject spring. You should be able to straight from the PRINT bed to ASSEMBLY! No External parts needed - no metal springs, no bearings, no magnets, no electronics, NO GLUE, NO SANDING... you get the idea!  As tested - 100% PLA 3D Printed!Print all 9 pieces and they'll fit together pretty easily.  The T6 is the only difficult piece to get onto the pv3.  The spade cap goes on the H1 after it's threaded through the H2.  Again, see the YouTube Videos to get excited, for assembly, and if needed, to show the solve as well!

A video for assembly and solving the puzzle is available here