M3 screws, nuts, washers

Standard M3 screws, nuts, and washers. They perfectly match the dimensions of M3 screws purchased from Taobao, allowing easy fastening of M3 stainless steel nuts. The hexagonal slot at the bottom of the screw also perfectly accommodates an M3 screwdriver. Practical testing shows favorable results.

The nuts can also be threaded onto plastic M3 screws and stainless steel M3 screws (note that the nuts are divided into two print profiles, corresponding to stainless steel screws and plastic screws, respectively)

Including the following print profiles:

M3x6, thread length 6mm

M3x8, thread length 8mm

M3x10, thread length 10mm

M3 nut (for plastic screws)

M3 nut (for stainless steel screws)

M3 washer (universal)

M3x12, thread length 12mm

M3x14, thread length 14mm

M3x16, thread length 16mm

M3x18, thread length 18mm

M3x20, thread length 20mm

M3x25, thread length 25mm

M3x30, thread length 30mm

M3x35, thread length 35mm

M3x40, thread length 40mm

M3x50, thread length 50mm

Note 1: When printed with official Bambu Lab PLA, the tolerance is precisely optimal (for other filaments, please test and fine-tune the dimensions yourself),

Note 2: For screws with a printed length exceeding 40mm, it is recommended to apply adhesive to the build plate before printing and set the printing speed to the lowest setting (otherwise, there is a probability of printing failure at the top of the screw).