Strong Makita DC18RC charger wallmount
Print Profile(2)
Bill of Materials
Description
Hi
This is a wallmount adapter for Makita DC18RC charger.
Upper and lower peg centers are 126mm. Check your models distance before printing. Some variants seem to have it 127mm.
Remove the four rubber feet from the bottom of the charger. Press the charger down onto the pegs on the mount.
Update 12.06.26: Added a chamfer on the bottom of the pegs and changed the wall thickness to 6 walls (now the pegs are full)
Dimensions:
- Width X: 172.5 mm
- Width Y: 138.5
- Total height: 16.5 mm
- Plate thickness: 4.5 mm
- Pegs height: 12 mm
- Pegs diameter: 8.5 mm
I have also made a DC18SD Makita charger wallmount model:
https://makerworld.com/en/models/1765649-makita-dc18sd-charger-wallmount#profileId-1878967
Boost Me (for free)
Thank you for printing.
Boost will be much appreciated.
Please please rate my print profiles after printing. It is very helpful.
It determines the visibility of my models and the reward points awarded to creator.
Please don´t add your print profiles to my published models without my permission!
It will ensure that posted print profiles are up to standart under my models.
Thank you for understanding.
Documentation (1)
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (146)