The Best Way to Start Your Day - Hueforge 6 Colors

Project: Best Way to Start Your Day.hfp
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 192.69x250mm in size
You may print at higher layer heights below the Base Thickness of 0.48mm
The Max allowed Thickness is 2.72mm and the Actual Thickness is 2.16mm

Filaments Used:
    #080a0d PLA PolyLite Black  Transmission Distance: 0.3
    #0056b8 PLA BambuLab Basic Cobalt Blue  Transmission Distance: 1.2
    #c00d1e PLA BambuLab Basic Red  Transmission Distance: 4
    #3f8e43 PLA BambuLab Basic Mistletoe Green  Transmission Distance: 1
    #ff9016 PLA BambuLab Basic Pumpkin Orange  Transmission Distance: 5.5
    #e2dedb PLA PolyLite White  Transmission Distance: 5
This print uses 6 unique filaments

Swap Instructions:
    Start with Black
    At layer #8 (0.72mm) swap to Cobalt Blue
    At layer #11 (0.96mm) swap to Red
    At layer #16 (1.36mm) swap to Mistletoe Green
    At layer #18 (1.52mm) swap to Pumpkin Orange
    At layer #22 (1.84mm) swap to White for the rest.