Search models, users, collections, and posts
CYBERTRUCK- XS: Print-In-Place
IP Report
Print Profile(1)
![[Cybertruck]: 0.16mm layer, 3 walls, 10% infill](https://makerworld.bblmw.com/makerworld/model/US84942bf236fb30/441866206/instance/2024-01-31_97c92086a79e6.jpg?x-oss-process=image%2Fresize%2Cw_100%2Fformat%2Cwebp)
[Cybertruck]: 0.16mm layer, 3 walls, 10% infill
1.1 h
1 plate
Open in Bambu Studio
Boost
83
154
40
10
444
324
Released
Description
Introducing: CYBERTRUCK- XS: Print-In-Place!
- A miniature version of the ever-popular Tesla CYBERTRUCK!
- Fully Print-In-Place, No assembly required!
- Add extra color with multi-material printing
- Designed in Fusion 360 as a learning project
Printing:
- Designed to be printed on the side, so the rims are parallel/flat to the build plate
- Some overhangs can be somewhat high, so print with that in mind (you shouldn't need support)
- Designed with a .4mm nozzle, so other sizes may not work as intended
- Printed with a brim
- 10% gyroid infill, 3 walls
Post-Processing:
- Remove brim, clean messy overhangs (if you have any)
- Wheels should come unstuck with a slight push from one side
Design Iterations
License
This user content is licensed under a
Creative Commons Attribution-Noncommercial
Comment & Rating (40)