Fall out boy cork tree
Print Profile(1)
Description
Project: Fall out boy cork tree.hfp
Print at 100% infill with a layer height of 0.04mm with a base layer of 0.2mm
The Model is 230x226.94mm in size
You may print at higher layer heights below the Base Thickness of 0.6mm
The Max allowed Thickness is 2.68mm and the Actual Thickness is 1.96mm
Filaments Used:
#080a0d PLA PolyLite Black Transmission Distance: 0.3
#e70e19 PLA Polylite Pro Red Transmission Distance: 4.2
#55331a PLA PolyLite Brown Transmission Distance: 0.8
#ffffff PLA BambuLab Basic Jade White Transmission Distance: 6.3
#4c5f71 PLA BambuLab Basic Blue Gray Transmission Distance: 2.1
#ffd91c PLA PolyLite Pro Metallic Gold Transmission Distance: 2
This print uses 6 unique filaments
Swap Instructions:
Start with PolyLite Black
At layer #12 (0.64mm) swap to Polylite Pro Red
At layer #20 (0.96mm) swap to PolyLite Black
At layer #21 (1mm) swap to PolyLite Brown
At layer #22 (1.04mm) swap to BambuLab Basic Jade White
At layer #24 (1.12mm) swap to BambuLab Basic Blue Gray
At layer #28 (1.28mm) swap to BambuLab Basic Jade White
At layer #44 (1.92mm) swap to PolyLite Pro Metallic Gold for the rest.
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (0)