L3Harris / EOTech PEQ-15 LAM Lighting Aiming Laser

Please be sure to comply with your local laws and do not use the model for inappropriate purposes.This is a cosplay prop.

Due to the new regulations, I cannot provide the complete model here. I will share the complete model on a cloud drive. After downloading the .3mf file here, you will receive the password, and you will have the complete toy.

Please do not open the downloaded .ZIP file directly with Windows Explorer, as it cannot be opened with a password. Please use unzip software such as 7-zip to open it.

Due to some comments in the comments section, I will no longer reply to any comments from now on!If you can understand the introduction, you will be able to obtain the complete model. If you cannot obtain the model, I will not provide any further explanation.

Someone asked me to make a laser sight.Requires an M3X30mm screw.

I also made a LEAF - PEQ for the PEQ-15 laser front iron sight.https://makerworld.com/zh/models/1808094-leaf-peq-for-peq-15-laser-front-mechanical-sight#profileId-1928611

The PEQ-15, manufactured by L3/Harris (also manufactured by EOTech with a slightly different appearance), is a multi-purpose laser targeting module that emits visible and infrared lasers for precise weapon aiming, as well as infrared light and an illuminator for target/area illumination. It entered service in 2003 during the Global War on Terrorism. The PEQ-15 is the most widely used LAM on the market. It was once standard issue with regular US forces and remains standard issue with the US Army and SOPMOD kits.

 

 

Please be sure to comply with your local laws and do not use the model for inappropriate purposes.

Under the new reward mechanism, please "Boost Me" more, give me five-star praise, and welcome everyone to share and show off their finished works, so that I can get more points. Your support is my biggest motivation to continue designing more models.

Reminder:

• Different filaments may cause the parts to be too loose or too tight, and may also make some supports difficult to remove.
• The position of the model printing takes into account strength and appearance (for example: vertical surfaces have better fineness and better representation of patterns and text; horizontal printing axes sacrifice accuracy but have better strength).
• Please keep the printing plate clean. All models are confirmed to be printable. It's not my fault if it turns into spaghetti.
• It is recommended that you equip yourself with a heat gun. Slightly heating the parts can solve many minor problems and can also compensate for minor part tolerances.