Search models, users, collections, and posts
Nazgûl - HueForge
IP Report
Print Profile(1)
0.08mm layer, 1 walls, 100% infill
Designer
4.6 h
1 plate
Open in Bambu Studio
Boost
11
25
0
0
12
3
Released
Description
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
The Model is 170x170mm in size
You may print at higher layer heights below the Min Depth of 0.48mm
The Max Depth is 1.3mm and the Actual Depth is 1.4mm
Filaments Used:
PLA+ HIGH SPEED Jamg He Black Transmission Distance: 0.3
PLA Spectrum Basalt Grey Transmission Distance: 0.6
PLA HIGH SPEED 3DPower Telegrey Transmission Distance: 3.1
PLA HIGH SPEED 3DPower Pure White Transmission Distance: 2.3
This print uses 4 unique filaments
Swap Instructions:
Start with Black
At layer #8 (0.72mm) swap to Basalt Grey
At layer #9 (0.8mm) swap to Telegrey
At layer #13 (1.12mm) swap to Pure White for the rest.
License
This user content is licensed under a
Creative Commons Attribution-Noncommercial
Comment & Rating (0)