Filament Spool Clip 0.6 g
Print Profile(5)
Description
Boost Me (for free)
Your support is my motivation!
Please read the precautions before printing, and Lady Luck will be by your side
Features:
Minimalist design
Smooth rolling
Supports AMS and various filament dry boxes and dryers
- Each weighs only 0.58 grams
Instructions:
plate 1: Monocolor Bambu logo version (Recommended to use an untextured build plate)
plate 2: AMS dual-color Bambu logo version (Recommended to use an untextured build plate)
plate 3: No-logo minimalist version
- plate 4: Hole diameter test (Must print first)
Note:
Due to variations in filament spool materials and production batches, installation hole diameters may differ Before mass printing, be sure to print plate 4 to confirm the hole diameter Then, after finding the appropriate hole diameter, modify the corresponding fine-tuning parameters (Global / Quality / X-Y Contour Compensation), and then proceed with mass printing
To ensure full compatibility with different AMS models, please install it on the inner side of the spool face opposite to the AMS guide This avoids interference with the guide If using AMS lite, it can be installed on both sides of the spool When used with AMS TH, AMS 2 Pro, or other brand dryers, please be sure to use filament resistant to temperatures above 90°C
Good luck~
Boost Me (for free)
Your support is my motivation!
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (4)