Print Profile(3)
Description
Windmill turbine design with 1-2-3.
You can make the model with 1, 2 or 3 propellers. If you want it simple, use only 1-2 propellers, but the 3-propeller solution is really the most beautiful. Your kids will be happy with it. Use as many colors as possible.
You can print turbines with a diameter of 180 and 140 mm with the A1 mini printer. Put grease between the turbines and the shaft.
1 spacer must be placed between the turbines. The stems and parts are designed to be printed horizontally. The windmill has a stake that must be stuck into the ground and fixed in this way.
Use a very clean plate because the adhesion will not be adequate and I recommend using a plate with good adhesion such as textured PEI or PEI plate.
My modells: my modells.
My windmill modells: my windmills
My clamp for my windmills: my clamp
If you are satisfied with my work, please, in addition to downloading the model, printing and evaluating it, you can also support it with boost.
Boost Me (for free)
Print, use and enjoy!
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (94)