Soap Cutter Jig

A very simple soap cutter for homemade soap. Slots are spaced to cut 25mm bars and are wide enough to use a crinkle cutter if you want. The inside dimensions are 170mm X 80mm X 90mm (about 6 5/8" X 3 1/8" X 3 1/2"), but I've included the FreeCAD file if you want to change anything. The sides are only 5mm, so make sure wall loops is set to 4 and infill is set to 25% for extra strength. 

I added a new print print file that's a little bigger and a little stronger than the first one, but it won't work with the A1 mini. It's size is 250mm L X 105mm W X 90mm H.

A Stray Cat Alley design