Rain Collector for DN87 Downspout
Print Profile(1)
Description
A rain collector for the gutter downspout in DN87 with an outlet for HT pipe DN50
In the upper part of the collector is a filter that sifts out dirt and foreign objects and lets them fall to the bottom
Rain collection can be deactivated with a slider. This is relatively delicate so use with caution. The M5 screw connection between the slider and the screw-on nuts must be re-threaded. At least when printed with a 0.4mm nozzle
The water collection chamber has an overflow
August 5 2025 Update: The collector has been in use since today. It works very well
Unfortunately, it has to be printed with a relatively large amount of support structure. A three-part version that can be printed with significantly less support material will follow shortly
Additional materials required:
6x M4x12 in stainless steel
Here is a video of how it works:
Update: August 15 2025
Drip tray added
Boost Me (for free)
Very welcome
Update August 7 2025: Overflow retrofitted
From the following parts
https://www.amazon.de/dp/B0015515XA?ref=ppx_yo2ov_dt_b_fed_asin_title
https://www.amazon.de/dp/B08241348F?ref=ppx_yo2ov_dt_b_fed_asin_title
https://www.amazon.de/dp/B0CYH9CKRT?ref=ppx_yo2ov_dt_b_fed_asin_title&th=1
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (0)