Yuooc

cover

IMG_20250307_193749.jpg

7.1mm

plate_1.png

7.6mm

plate_2.png

7.8mm

plate_3.png

plate_4.png

2025-07-04_2399ed4369512.png

<ul><li>这个打印配置是需要材料打印过程会自然收缩的材料，可以打印一个测试一下</li><li>打印材料建议使用高层间粘合的材料，避免卡扣过于脆弱</li><li>打印成品正常收缩是会比模型尺寸小0.01~0.1之间，如果没有收缩打印无收缩的配置（也可以自行打磨一下）</li><li>A系列因象脚问题打印十字轴较大，需要根据自己材料设置象脚补偿，不然十字轴顶部容易变大不易安装，可以打印A系列打印配置。</li><li>倒置打印需要加Brim</li><li>0.2mm喷嘴打印参数，精度较高，适合成品键帽</li></ul>&nbsp;

<ul><li>This print profile is for materials that naturally shrink during the printing process; you can print one to test</li><li>It is recommended to use materials with high layer adhesion for printing to prevent the snap-fit from being too fragile</li><li>The normal shrinkage of the printed product will be between 0.01~0.1 smaller than the model size. If there is no shrinkage, print with a non-shrinkage profile (you can also sand it yourself)</li><li>Due to elephant foot issues, the cross-axis of the A series prints larger. You need to set elephant foot compensation according to your material, otherwise, the top of the cross-axis will easily become larger and difficult to install. You can print the A-series print profile.</li><li>Inverted printing requires adding brim</li><li>0.2mm nozzle print parameters, with higher precision, suitable for finished keycaps</li></ul>&nbsp;

Default material shrinkage is 0.01~0.1mm (the keycap's cross-axis connection is tighter with this model profile)

{3E2500C5-4A45-44cb-9C9D-8E9D9758CC9A}.png

<ul><li>这个打印配置是需要材料打印过程会自然收缩的材料，可以打印一个测试一下（也可自行打磨）</li><li>材料最好选用高层间粘合材料，否则拆除过程中十字轴容易断裂，以及卡扣很脆弱的</li><li>打印成品正常收缩是会比模型尺寸小0.01~0.1之间，如果没有收缩打印无收缩的配置</li><li>A系列需要根据自己材料设置象脚补偿，不然十字轴顶部容易变大不好装</li></ul>0.4mm喷嘴参数，打印速度较快，但是精度比较差，尤其是A系列象脚影响十字轴尺寸不容易安装

<ul><li>This print profile is for materials that naturally shrink during the printing process, you can print one to test (or sand it yourself)</li><li>It is best to choose materials with high layer adhesion, otherwise the cross axle may easily break during removal, and the buckle is very fragile</li><li>The normal shrinkage of the printed product will be between 0.01 and 0.1 smaller than the model size; if there is no shrinkage, print the non-shrinkage profile</li><li>Series A requires setting elephant foot compensation according to your material, otherwise the top of the cross axle easily becomes too large and difficult to assemble</li></ul>0.4mm nozzle parameters, print speed is relatively fast, but accuracy is relatively poor, especially for Series A where elephant foot affects the cross axle size making it difficult to install

0.4mm material shrinkage print profile

A1打印出来尺寸会比模型小，而P1打印又会比模型大，不确定是材料原因还是机型原因。这个配置模型仅调整了十字轴大小，使其更合适应对A系列的象脚问题。<ul><li>如果想键帽容易拆装，可以用其他机型打印此配置（但是材料如果有收缩会很松）</li></ul>

A1 prints smaller than the model, while P1 prints larger than the model. Unsure if it's due to material or printer type.This profile model only adjusts the cross shaft size to better adapt to the elephant's foot issue on A-series.<ul><li>If you want the keycaps to be easy to install and remove, you can print this profile with other printer models (but if the material shrinks, it will be very loose)</li></ul>

Dedicated for A-series models (reduced cross shaft)

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.

This user content is licensed under a Standard Digital File License.

<boostme><boosttitle>为我助力</boosttitle><boostcontent>助力给谁都是给，怎么不能给我呢~</boostcontent></boostme>喜欢薄膜的手感又想要十字轴键帽。为了薄膜键盘也能用上好看的机械键帽，历经6个月测试优化，常见的四个薄膜轴的尺寸最终版本用了它就可以爆改薄膜键盘，不再为无法更换键帽发愁了。如果需要其他尺寸的轴体可以喊我上传~为确保精度，推荐0.2mm喷嘴打印如果打印出来尺寸偏大，可以自行打磨四个边<ul><li>常见问题答疑</li></ul><ol><li>安装过程中容易出现卡扣断裂怎么办？答：建议使用高层间粘合材料进行打印。</li><li>怎么把键帽拆下来？答：建议边轻微旋转晃动边往外拔，不要偏向一边硬拔，容易造成十字轴断裂。</li><li>十字轴断在键帽里面怎么办？答：使用烧热的针或者铁丝插入十字轴中间，等待完全冷却后拔出即可。</li></ol>仅可打印自用<blockquote>严🈲商用，发现必究</blockquote>

<boostme><boosttitle>Boost Me</boosttitle><boostcontent>A boost for anyone is a boost, why not me~</boostcontent></boostme>Like the feel of membrane but want cross-stem keycapsSo membrane keyboards can also use nice mechanical keycapsAfter 6 months of testing and optimization, the final version for the four common membrane switch sizesUsing it, you can heavily modify membrane keyboardsNo more worrying about not being able to change keycapsIf you need other switch sizes, you can ask me to upload them~To ensure accuracy, 0.2mm nozzle printing is recommendedIf the printed size is too large, you can sand the four sides yourself<ul><li>Frequently Asked Questions</li></ul><ol><li>What if the buckle breaks easily during installationAnswer: It is recommended to print with materials that have strong layer adhesion</li><li>How to remove the keycapAnswer: It is recommended to gently rotate and wiggle while pulling outwards, do not pull hard to one side as it may cause the cross stem to break</li><li>What if the cross stem breaks inside the keycapAnswer: Use a heated needle or wire to insert into the center of the cross stem, wait until it cools completely, then pull it out</li></ol>For personal printing only<blockquote>Strictly prohibited for commercial use, violators will be prosecuted</blockquote>

Print Profile(3)

Description

Comment & Rating (18)

License

Related Models

Membrane switch converter, membrane switch to cross-axis, crater switch to cross-axis (0.43g each)

Print Profile(3)

Description

Comment & Rating (18)

License

Related Models