M4 MAC mini & iPad mini6/7 Macintosh
Print Profile(1)
Description
A retro Macintosh-style ornament that supports M4/M1 MAC mini, comes with an M4 MAC toggle switch based on a simple lever principle, and also supports iPad mini 6 and 7
plate 9 is a replacement part for the M1 MAC mini base, you can print it to replace the M4 mac mini base
Original work, creation is not easy, commercial printing and selling are prohibited, thank you
A USB-C cable can run through the side, using the front USB-C port of the M4 MAC MINI to power the iPad mini 6/7
There is a storage box at the back, which can hold four solid-state drives and some miscellaneous items
When printing, 3 walls and 15% infill should theoretically be strong enough, I suggest increasing to 4 walls and 20% infill
When printing the base, the side heat dissipation air inlets do not require supports, just bridge directly
The finished product needs to be positioned with dowel pins, fixed with glue, for the dowel pins, I personally recommend buying metal round rods with a diameter of 2.5MM and a length of 10mm (the print files include 3D printed dowel pins)
For the toggle switch, I suggest buying a metal round rod with a diameter of 2.5MM and a length of 20mm (the print files include this 3D printed shaft, but I am concerned about its strength)
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (21)