Wednesday Addams Hueforge
Print Profile(1)
Description
Boost Me (for free)
If you like this model, give me a boost; this will help me create more free models for you!
Boost Me (for free)
If you like my work, give me a boost, it will help me a lot and you will be able to enjoy more free models.
Wednesday Addams Hueforge in pencil sketch style
Project: miercoles_addams.hfp
Print with 100% infill and a layer height of 0.08 mm, with a base layer of 0.24 mm.
The model measures 143.53 x 200 mm.
You can print with higher layer heights, below the base thickness of 0.48 mm.
The maximum allowed thickness is 2.24 mm and the actual thickness is 1.75748 mm.
Filaments used:
#000000 PLA Smart Recycled Black. Transmission distance: 0.5
#848485 PLA Winkle Ash Gray. Transmission distance: 0.4
#ffffff PLA Smart Recycled White. Transmission distance: 5.7
This print uses 3 unique filaments.
Swap instructions:
Start with black filament.
At layer 7 (0.72 mm), change to ash gray.
At layer 11 (1.04 mm), change to white for the rest.
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (20)