A1 series Desktop Waste Bin + Scraper Storage

This poop bin is suitable for daily single-color printing tasks and can also serve as a small desktop trash bin. If you are doing multi-color printing, you might need to print a separate matching baffle. Since I don't have much demand for multi-color printing, I haven't designed a dedicated baffle for it yet, please understand

Please clean the build plate before printing the main body of the box! Otherwise, there is a risk of warping!
I used Bambu Lab A1/textured PEI build plate for printing, and the room temperature was 30 degrees Celsius.

Filament used in the main image:

Bambu PLA Basic Light Gray (10104) / PLA Matte Charcoal Black (11101)

Filament used for another color scheme in the accompanying images:

Bambu PLA Matte Ivory White (11100) / PLA Basic Dark Gray (10105)

- The main body of the box features a nested structure of two inner and outer parts, with anti-slip protrusions at the front and rear grooves on the top for easy gripping.
- The front Bambu icon is a separate detachable part, both for ease of printing and for fun. So if you like, you can design other icons yourself for replacement.
- The rear scraper holder is fully compatible with the Bambu bed scraper, and since it is also a detachable design, you can design other matching components as needed.
 

Print with caution if you have OCD! Although I have tried my best to adjust printing parameters and change the model structure to avoid layer lines, aiming for a smooth and flat surface effect close to product level, for the current shape and structure, there are still some small surface layer line defects that I have not yet solved...

This is the first 3D printed item I have designed since I started with 3D printing. There are still many aspects that need learning, optimization, and improvement. Looking forward to your comments and suggestions :)