DAN Soft Dart Blaster - A2.1 Version (12.13)

A1.0-2025.8.9 Version:

Optimized dart feeding and jamming issues. Adjusted hardware parameters.

Future version optimizations:

1. Optimized magazine feeder

2. Integrated with a bearing tube to offer a return spring version, without additionally increasing the blaster's length, making the overall design more harmonious.

3. Optimized the flat stock version's storage compartment, with the top of the compartment simultaneously reinforced to prevent easy breakage.

4. May be modified to direct push feeding (currently under trial).

A2.0-2025.10.13 Version:

1. Optimized the plunger head, resolved the accidental discharge issue, and increased the upper limit to dual 2.0 curly 56 points.

2. Added dual 1.8 plunger head weight ring components, and dual 2.0 plunger head weight ring components.

3. Added a 17-round long dart storage box.

4. Added metal-reinforced gantry printed parts.

Note: For printing the A1.0 version, you can just print plate 5 within the configuration and replace the M5 screw and nut to resolve the accidental discharge issue. Printing plate 9 can upgrade the upper limit to dual 2.0 curly.

Required accessories: M5 screw - 110mm, 2 M5 flange nuts.

A-2.1-2025.12.13

1. Optimized the plunger head screw hole position for easier installation.

Hardware and printed parts: [Xianyu] https://m.tb.cn/h.SBs6H8W?tk=WhRofLbvqDc HU293 「I published [DAN Soft Dart Blaster Remodeled New 2.0 Version. Special Note: New Model] on Xianyu」
Click the link to open directly