Sanemi Shinazugawa - Demon Slayer
Print Profile(1)
Description
The dimensions are 250mm x 186.75mm (you can scale it down if you want, but keep the Z to 2mm)
A follow would help a lot! <3 Thank you!
Layer height 0.08mm (extra fine)
Initial layer height 0.16.
Sparse infill density 100%, rectilinear.
The Max Depth is 1.8mm and the Actual Depth is 1.9mm
Filaments Used:
PLA BambuLab Basic Black Transmission Distance: 0.3
PLA BambuLab Basic Jade White Transmission Distance: 5
PLA BambuLab Basic BambuLab Green Transmission Distance: 2
This print uses 3 unique filaments
Swap Instructions:
Start with Black
At layer #8 (0.72mm) swap to Jade White
Border Only Colors from here until the end.
At layer #15 (1.28mm) swap to BambuLab Green for the rest.
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (7)