Portable Pillbox (Customizable Size)

This model is a portable small pill box. The size can be customized according to your preferences, or you can directly print the existing sizes.

It features large storage space, fast printing, compact portability, and customizable dimensions.

Features:

• Compact and portable, fast printing, with very little filament usage
• Exterior dimensions are customizable, or you can directly print the existing sizes
• The internal space is a large compartment, suitable for holding more pills or parts
• New snap-fit sliding lid design, smoother and more durable, with a satisfying click sound when closing
• Customizable text in slicing software, making it stylish and unique
• There are three print profiles with dimensions: 60*25*14mm, 90*30*13mm, 90*30*25mm; if no text is needed, single-color printing is sufficient

About Dimension Customization:

• The customization interface has three parameters: L/W/H, representing the length, width, and height of the pill box's outer contour respectively
• Since the shape is a groove, L in the dimensions must be greater than 2 times W (L≥W*2), meaning the length is greater than twice the width
• After downloading the customized file, you need to split it into two parts when opening it, to avoid issues with the two parts not being on the same plane
• The dimensions refer to the outer contour. The internal space dimensions can be calculated as follows: internal length, width, and height are (L+4-w/2)mm, (w-8)mm, and (h-3)mm respectively

About Text Customization:

If you want to add custom text to the model's surface, the following methods can help you:

• Click the Ta icon in the chart above to add text
• If adding to the bottom surface of the model (as in this model), set the text thickness to minimum and the embed depth to 0.5
• And select the color of the individual text in the object list

If you want to modify the text:

•  
• Locate the text in the object list, right-click and select edit text to modify it
• Select the font color, then print

2025.9.19 Update: Modified the gap when the lid closes, resolving the issue of excessive gap during closure. After improvement, it closes snugly and won't wobble To improve print success rate, please ensure the print plate is clean to prevent warping during printing 2025.9.22 Update: Improved the tightness of the snap-fit when closing