Beer Cap - Universal Bottle Cap for Glass Bottles
Print Profile(7)
Description
Biercap - Beercap - protect your drink and yourself from insects or from accidentally tipping over
The cap simply clips onto the bottle and is designed with a universal fit for German/European standard 0.5l glass beer bottles (elongated and bulbous) as well as standard 0.33l glass bottles AND SIMULTANEOUSLY for 0.5l glass beer bottles, for example from Carlsberg or Budweiser or other Czech beers
Standard 0.2mm - printable in one piece “in-place” without support for the slot hole Works perfectly on the P1S with PETG A print profile with support and enough clearance to be easily removed is also available In the profile with the print plate and the set of 8 sports-themed caps, all can also be selected individually
I RECOMMEND PETG
It also works with PLA - tested - Caution: the PLA filament should not be too old, it still needs some “flexibility” and resilience However, I have also added two PLA profiles with higher tolerances for the cap (looser and very loose fit)
If the hinge on the cap “sticks” and becomes immobile, especially with PLA, this is usually due to the filament itself and missing/unsuitable calibration You can then try/use the X-Y Contour Compensation (Quality>Precision) setting in BambuStudio and use the value -0.1 (should be sufficient) to create a little more clearance in the gap
Icons/multi-color with AMS, single-color also possible without AMS
If you want other/special designs on the cap, just let me know 😊
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (140)