A bowl of spaghetti

Print in Place spaghetti only needs 100g for a warm meal

Comes with a bowl, print and eat immediately

When printing this model, it is recommended that someone monitors the printer to avoid spaghetti issues I printed two batches with a relatively high success rate

Due to file slicing errors, the slicing parameters cannot be fully uploaded you need to download the STL/CAD file and slice it locally for printing

That's enough of the antics let's talk about ways to avoid spaghetti
1:When handling the printing plate it is recommended to wear gloves purchase labor protection gloves or disposable PET gloves
2:When printing larger models it is recommended to first wash the printing plate with dish soap then apply glue
3:You can prepare a bottle of 95-degree alcohol to clean dust from the printing plate Remember to buy medical alcohol or food-grade alcohol industrial alcohol contains formaldehyde alcohol can only clean dust from the printing plate it is not effective against grease stains and don't listen to them saying alcohol can harm the coating come on the printing plate is originally a consumable are you planning to use it forever
4:Beginners can also mix their own glue purchase polyvinylpyrrolidone K90 analytical grade mix at a ratio of 1g powder to 20g alcohol soaking in hot water can accelerate dissolution ☞For advanced play you can add AES surfactant and diethylene glycol mixture☜ the proportion doesn't need to be too much it can accelerate dissolution For the prepared glue it is recommended to purchase a non-woven applicator bottle or spray bottle Note:[Beginners should not try advanced play] just mix alcohol and K90
5:Before printing first check if the model needs supports Is the support strength sufficient Do you need to manually draw supports!!
6:If spaghetti or nozzle clogging really happens don't be afraid first heat the nozzle and use tweezers to clean it You can also enable maintenance mode on the machine the hot end will continuously heat up then clean with tweezers Note that the lifespan of the hot end will be significantly reduced after clogging making it more prone to damage It is recommended that if this problem occurs within three months of a new user receiving the machine they should directly contact customer service for replacement parts
7:Seriously man if you've taken all these preventive steps and still mess up I can recycle the machine for 50