Chamber Heater P1S P1P X1C
Print Profile(2)
Bill of Materials
Description
I designed a chamber heater for my P1S to print engineering plastics.
All you need is a Creality Filament Dryer 2.0, which serves as a donor for the electronics.
All screws can be reused. Only 6 additional 3x15mm plastic screws are needed.
A high-temperature filament such as PA6 GF, PET CF, or similar must be used as material.
Aluminum heat shield tape (up to 350°C) was applied to the housing and lid, surrounding the heating coil.
Caution: the right housing cover of the printer is exposed to very high heat.
- To avoid deformation, a 3mm ceramic fiber mat must be attached to the back of the chamber heater.
Use at your own risk.
License
You may create derivative works based on this object, provided that all such derivative works are published exclusively on the MakerWorld platform and include proper attribution to the original creator. You may not share, upload, host, distribute, or publish this object—or any derivative work of this object—on any other digital platform, marketplace, or distribution channel. Commercial use of this object and any derivative works is strictly prohibited. This includes, but is not limited to, selling, renting, sublicensing, or using the object in any context in which you receive monetary compensation or other financial benefits.
Comment & Rating (3)