A Christmas Story Leg Lamp Hueforge Bookmark 100mm - Free 3D Print Model

Search models, users, collections, and posts

jason.matusiak

Generative 3D Model>Hueforge & Lithophane

IP Report

Print Profile(2)

All

P1S

X1 Carbon

H2D

X1E

P1P

A1 mini

H2D Pro

H2S

P2S

H2C

X2D

A2L

0.08mm layer, 1 walls, 100% infill

Designer

45 min

1 plate

5.0(1)

Full Bed 250mm Tall Leg Lamp

Designer

2.5 h

1 plate

Open in Bambu Studio

Boost

Released

Description

This is a 100mm tall bookmark of the classic A Christmas Story leg lamp. It is done with 4 colors and takes less than an hour to print. You can make the print bigger by changing the X and Y sizes, but do not mess with the Z!

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 66.67x100mm in size

Filaments Used:
    PLA KingRoon Black Transmission Distance: 0.3
    PLA KingRoon Brown Transmission Distance: 2
    PLA KingRoonn Orange Transmission Distance: 5.5
    PLA Kingroon Yellow Transmission Distance: 5.7
This print uses 4 unique filaments

Swap Instructions:
    Start with Black
    At layer #11 (0.96mm) swap to Brown
    At layer #13 (1.12mm) swap to Orange
    At layer #19 (1.6mm) swap to Yellow for the rest.