Saja Boys, KPOP Demon Hunters Bookmark

Thank you for downloading my works. If you would like to sell my designs, past and future, a commercial license can be obtained from my MakerWorld or Patreon page.

Sorry about the many swaps. I wanted to limit the number of filaments to five and keep the print relatively thin. It was necessary to capture all their hair and outfit colors. Lots of Hearts.

Saja Boys Bookmark, KPOP Demon Hunters

Pictured are printed using an 0.2mm Nozzle

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

Filaments Used:

PLA BambuLab Basic Black Transmission Distance: 0.6

PLA BambuLab Basic Cobalt Blue Transmission Distance: 1.2

PLA BambuLab Basic Gold Transmission Distance: 5

PLA BambuLab Basic Hot Pink Transmission Distance: 3.9

PLA BambuLab Basic Ivory White Transmission Distance: 4.6

This print uses 5 unique filaments

Swap Instructions:

Start with Black

At layer (0.56mm) swap to Cobalt Blue

At layer (0.72mm) swap to Gold

At layer (0.8mm) swap to Cobalt Blue

At layer (0.96mm) swap to Hot Pink

At layer (1.28mm) swap to Gold

At layer (1.44mm) swap to Ivory White for the rest.
 

This is a five color print. Use this tutorial by Cloudy Nostalgia to print more than 4 colors on 1 AMS.

Can be resized to accommodate your printer or preference by adjusting the X and Y axis the same percentage while leaving the Z axis at 100%. The best way to achieve this: With Uniform Scale checked, adjust the Y axis to the desired size (this will ensure the X axis is the same proportion as the Y axis), uncheck the Uniform scale, adjust the Z axis back to 100%, slice plate, and print. Stringing may occur with Hueforge, just use a lighter to whisk them away. 

More prints: Bookmarks -- Portraits -- Coasters -- Clocks -- Puzzles -- Display Stands -- Display Frames

They are sorted and can be found in my Collections - https://makerworld.com/en/@3djd/collections