Nissan Skyline Hueforge
Print Profile(0)
Description
Project: Silvia S-14.hfp
Print at 100% infill with a layer height of 0.06mm with a base layer of 0.16mm
The Model is 181.18x220mm in size
You may print at higher layer heights below the Min Depth of 0.46mm
The Max Depth is 2.2mm and the Actual Depth is 2.2mm
Filaments Used:
PLA PolyLite Black Transmission Distance: 0.3
PLA BambuLab Basic Blue Gray Transmission Distance: 3
PLA PolyLite Grey Transmission Distance: 1
PLA PolyLite White Transmission Distance: 5
This print uses 4 unique filaments
Swap Instructions:
Start with Black
At layer #13 (0.88mm) swap to Blue Gray
At layer #18 (1.18mm) swap to Grey
At layer #19 (1.24mm) swap to White for the rest.
Documentation (1)
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (0)