TETRΔS and TETR_S storage box

Have you printed both TETRΔS and TETR_S and no longer want to transport the parts in a bag? 
The wait is over, you've come to the right place!

The two games are not included in the print files. They can be found here:
TETR_S https://makerworld.com/de/models/1238708-tetr_s-just-another-balance-tetris-game-no
TETRΔS https://makerworld.com/de/models/1398393-tetrds-the-new-dimension-tetr_s-balance-tetris, here the print profile “All parts additional needed to upgrade TETR_S to TETRΔS” is sufficient.
 

Here you will find 2 print profiles:

• the colorful version which fits perfectly to the design of the games “tetrΔ_s-box_xxx_color”
• and the simple one in one color “tetrΔ_s-box_xxx_black”

Update 20.01.2026: I've revised the inlay tolerances; the box is now easier to open and close. Furthermore, the print profiles have been optimized. All previously printed parts are compatible with the revised ones.

Due to recent events: I have no control over print profiles created by other users. If you want the latest, optimized version, be sure to use print profiles with the "Designer" suffix; these were created by me and are optimized as needed.

 How is the box assembled

• Print all parts

• Press both closures into the insert with the arrow pointing downwards and rotate it 90° clockwise as shown in the photo.

  

• Place the two large sealing discs in the lid and the two small ones in the bottom box. Apply a few drops of glue to the marked area as shown in the photo. Then press the sealing discs firmly into the recess.

  

• Print the description (this time on a printer that prints ink on paper 😉): tetrΔ_s-Instructions.pdf (more languages in the documentation section)

• If you have printed out the colored version, glue the letters in.

  

The game instructions are now available in more languages!

Take a look to the documentation section.

I would need your help for all other languages: The translations.zip file contains an Excel file with all the text blocks. Please add your preferred language to it and send back the file via chat. Thank you!

Fore more take a look to my games collection.

I frequently receive inquiries about printing problems with various print profiles created by other Makerworld users.

Unfortunately, I have no control over the profiles that other Makerworld users upload to my models (Neither the geometry nor the print settings). 

While these are often well-intentioned, they are not maintained, and the results are sometimes unsatisfactory.

Therefore, I strongly recommend using only the print profiles marked "Designer". I can only provide support for these!