Bates House LightBox (Psycho) scale 1:87
Print Profile(1)
Bill of Materials
- circular magnet 4x2mm x 8:
Description
I've always loved the design of the house from Psycho and other horror films. I looked for a printable model with a good level of detail, but unfortunately, none of them satisfied me; so I decided to create one with a high level of detail.
The model is made up of about 60 pieces and has many small parts, all of which were printed with my P1S with a 0.4 mm nozzle and a BL texture plate; th ematerial ued is PLA matte.
Due to the small parts, failures may occur if you don't carefully inspect everything before printing. Please check the cleanliness of the plate, the filament must be dry, the nozzle must be clean, and if necessary, increase the plate temperature for the first layer or use 0.2 mm nozzle.
After printing the front logo, check for any micro gaps that could allow white light to filter through. Try filling the gaps with filler.
The model is distributed across 14 plates, all ca be printed witout AMS excluded the front logo need.
The color of the light can be changed simply printing a disk with 53mm of diameter 0.4 thickness directly on Bambu Studio.
The model is 1:87 scale can be used as miniature model for diorama
Additional material required
-LED kit MH001
-4 circular magnet 4x2mm
For any question or trouble please contac me, I will be happy to help you.
Boost Me (for free)
If you like my model, a boost will be a great help. Thanks
Documentation (1)
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (22)