Simple No-screw 3M Strip Paper Towel Holder

Description

Keep your space neat and organized with this versatile paper towel holder designed for makers and DIYers. This model mounts securely to a wall, under a cabinet, or even beneath a desk—all without screws, nails, or permanent fixtures.

• No damage install – great for apartments, rentals, or temporary setups
• Flexible mounting options – wall, cabinet, or desk underside
• Tool-free design – quick to attach, easy to remove
• Clean and modern look – minimal footprint, functional design

Perfect for workshops, kitchens, craft spaces, and garages.

Print, mount, and enjoy instant access to paper towels wherever you need them—without drilling holes or leaving marks.

Instructions

1. Print Settings
   • Layer height: 0.20 mm
   • Supports: None required
   • Quick to print and easy to assemble
2. Mounting
   • Use Medium (17021) 3M Command Strips – 4 total (2 pairs, unseparated).
   • Stick the strips in the small indents on the back and poke the pull tabs through the holes.
   • Fold the tabs back into the pocket and cover them with the cap piece to conceal them.
   • This makes removal easy later using a flat screwdriver.
3. Positioning
   • Note there is a LEFT and RIGHT side:
     • The tab slots should point inward toward each other (see photos).
   • Leave up to ½ inch of wiggle room when placing the sides, using a roll of paper towels to guide spacing.
4. Use
   • To load: Unscrew the end, slide on a new roll, then tighten back in place.
   • To remove: Pull straight out on the holder while gently pulling on the Command Strip tabs.
     • Do not pull at an angle or with too much force all at once—this can tear the strip.

For best results, always follow 3M’s official instructions for proper use of Command™ Strips. This includes surface preparation (cleaning with isopropyl alcohol, avoiding dust, grease, or residue) to ensure a secure bond. 3M also provides guidance on which surfaces to avoid, such as wallpaper, textured walls, unfinished wood, or other delicate/porous surfaces that may not hold or could be damaged. Refer to 3M’s official documentation for complete details before mounting.