Print Profile(4)
Description
Low Pro Under Desk Foot Rest - 20 Degree - 3 SIZES
A low profile easy to print foot rest for under your desk. Helps with posture and foot placement. Can help people with the bad habit of folding their feet under their chair by giving them a foot fidget/rest.
THREE SIZES: 300mm width for smaller feet and 400mm and 500mm widths for larger feet. 20 degree fixed angle. Rubber feet prevent sliding on most hard surfaces. For low pile carpets print the optional Carpet Spike Base parts. The spikes work great and keep the foot rest in place.
Assembly: First clean up all supports and deburr any elephants foot on all parts. The large oval shaped support will pop right out with a flat blade screwdriver. Next add super glue to the foot pad holes then slide in the pins quickly and fully. Then repeat with the other half of the foot pad. Next do the same thing with the sides. Add a little glue then press on the sides. They fit VERY SNUG. Seat fully - Place rubber feet in the recess to prevent sliding on desk mats and hard surfaces. I used these “rubber feet” specifically. AMAZON LINK.
Prints great in PLA+. Examples printed in E-Goo Rapid PLA+. Standard supports used on the side panels.
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (114)