Keder converters - for VW California like T5-T6.1

Hey, thanks for being here :)
If my project made you smile or even better helped you in some way, please…. 

It means a lot to me and motivates me to do more technically interesting projects like this one (don't forget to follow my profile for more projects :):

Need to use the Keder T-shaped side mounting strip, available for VW California T5-T6.1 models?

I've prepared a set of various brackets that allow you to hang a washing line, secure a tent tarp, position awning straps, etc.
Some of them can be installed and removed without any additional components, while others provide a firm grip using an M5 screw.
The photos say it all.
 Important info:

=> Access to the rail is from the front (B) and rear (A) of the car- check picture - those access points are suddenly different !
Due to the fit and durability of the brackets, I recommend using the brackets marked A on the design – they are inserted from the rear of the car - just slip from back to front. If you need to insert the bracket from the front of the car (B access) for example, due to an awning – use the B brackets - it will fit but it is not as easy access shape like B (they have a smaller holding element inside the rail).

Check the pictures which one are A or B (or just neutral) on the print plate - choose the right one for you :)

=> Fastening for washing tubes prepared for a 16mmx1.5 tube (the best weight-to-strength ratio). Remember that the slats should not be overloaded with a large amount of laundry!

Please check my other projects :) https://makerworld.com/collections/18436729

rate profiles and..