Halloween Pumpkin Fidget Toy
Print Profile(3)
Description
Halloween Pumpkin Fidget Toy
🎃 A simple, Halloween-themed jack-o-lantern pumpkin fidget toy!
🍬 Keep yourself entertained during downtime or print a bunch to give out during Halloween or at Trunk or Treat!
👻 This has a basic, gyro-like fidget design with fun spinning action.
🐈 It prints in-place without supports, overhangs, or any bridges.
After printing, you may need to push its rings a few times to get them to loosen up. The more you play with it, the better it works!
💡 The print profiles have a “Standard” model with a 0.20mm gap between rings and a “Loose” model with a 0.30mm gap between rings.
The smaller gap helps with smoother movement and better motion, but you may have better luck when printing with a larger gap. Try the “Standard” version first, and then try the “Loose” version if you cannot move the rings.
Please let me know if you have any issues with the model printing solid, with no movement. This can be caused by some calibration issues with your printer or filament. I can upload versions with greater tolerances, if necessary.
Boost Me (for free)
Like my work? A BOOST would be greatly appreciated! Thank you!
Halloween Pumpkin Fidget Changelog:
2025-10-09, 1.1.5
- Double-sided version of model uploaded
2025-09-17, 1.1.1
- thicker design for better spin
- print profile now contains standard and "Loose" version
- updated geometry
2025-08-30, 1.0.1
- slightly updated geometry
- new version uploaded
2025-08-28, 1.0
- initial release
- tested, functional design
Created from scratch using FreeCAD.
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (80)