Anti Vibration and Grip TPU Feet

These anti-vibration feet are made from TPU and are designed to reduce noise during printing, especially noticeable in the calibration phase, while also improving your printer’s grip and stability. They are compatible with all current A-series printers (A1 and A1 Mini).

For best results, I recommend printing them in TPU, ideally with a higher shore hardness like 95A rather than 85A or 90A, since the increased stiffness provides better support while still absorbing vibrations. Other materials such as PLA or PETG won’t perform nearly as well. The inner structure is designed with the lightning infill method, which allows the feet to handle substantial weight while still permitting slight horizontal movement.

As for print details: all four feet together weigh around 50g. With TPU HF, the print time is about 2.5 hours, and with standard TPU, roughly 4 to 5 hours.