Stacked OpenGrid Tiles

🧱 Stacked Tile Remix - Manual Stacking for Efficient Printing

This is a remix of the tile system originally developed by  David D, with tile generation by  BlackjackDuck - huge thanks to both! I've added a manual stacking solution to help streamline the printing process, especially since the generator currently has some bugs when it comes to stacking.

To reduce handling time, I’ve started manually stacking the tiles in fixed sizes. I’m currently testing  different stack size, which are working well so far. My goal is to reach 10–12 stacked tiles, and I’ve already prepared profiles up to 7-stack configurations.

• 🧩 If you need help with other sizes, feel free to reach out - happy to assist!
• 📐 When stacking manually, add 0.4mm per tile to maintain proper fit
• 🔥 If you're using PETG supports, make sure to match your bed temps with your PLA settings to avoid adhesion issues

kfc old remark - This is still in testing, but I figured others might benefit from the workflow. It’s a step-by-step approach, and I’ll keep refining it as I go.

now that I've completed the testing, I can upload the entire collection - stay tuned and enjoy this short gif

🆕 New Model Alert
Check out my MudoStack—a stackable open storage system designed for modular organization and clean aesthetics.

Change Log

🔧 Update 25-10-25

The version with screws (and without connectors) now includes the full grid layout.

Next up: I’ll be uploading the remaining profiles I’ve designed in various sizes to cover the entire grid and its possibilities.

Thanks for your patience - it took a while because I wanted to print and test everything to ensure it all works smoothly.

🔧 Update 25-10-09

Added Double-Quintuple files

🔧 Update 25-09-16

just found out a way to reduce dramatically the printing time just by positioning the tiles better which basically manage better the filament change process - look at that!!:

before 8X8 5 tiles stack was 15h and now 14h - full hour

and the crazy amount of 14.4 g of filament :D

this update include a wide range of sizes into it currently only w/o screws but w/ connectors - will add more profile later

9X7 - 9X2, 8X9 - 8X2, 7X7 - 7X2, 6X6 - 6X2, 5X5 - 5X2, 4X4 - 4X2, 3X3 - 3X2, 2X2

🔧 Update 25-09-11

So after some testing - the gap is small in my opinion so I've raised it to 0.3 and seems to be operating perfectly,
Also tested 10 stacked tiles version seems to be working smoothly - will run some more tested and will share the profile

Added 8X8 plate tile size per request - feel free to add more requests for different sizes

 keep in mind to remove the tower for printers with less then 280mm bed size

🔧 Update 25-09-04

seems like the gap can be reduced I'm currently testing the possibilities and so far I've managed to reduced to 0.2 between tiles - saving time and filament :)

🔧 Update 25-08-31

Quad are working fine - this week testing will be limited to - 5-7 stack tiles