Snoopy Bookmark
Print Profile(1)
Description
Snoopy Bookmark
Shown printed with a .4 mm nozzle
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
Filaments Used:
#080a0d PLA BambuLab Basic Black
#00358e PLA BambuLab Basic Blue
#ffffff PLA BambuLab Basic Jade White
#c00d1e PLA BambuLab Basic Red
#00ae42 PLA BambuLab Basic BambuLab Green
This print uses 5 unique filaments
Swap Instructions:
Start with Black
At layer #5 (0.48mm) swap to Blue
At layer #11 (0.96mm) swap to Jade White
At layer #17 (1.44mm) swap to Red
At layer #24 (2mm) swap to BambuLab Green for the rest.
You can resize the model to fit your printer or preference by scaling the X and Y axes by the same percentage while keeping the Z axis at 100%. The easiest way to do this is:
- Enable Uniform Scale and adjust the Y axis to your desired size (this will automatically scale the X axis proportionally).
- Disable Uniform Scale and reset the Z axis to 100%.
- Slice the plate and print.
Note: When using Hueforge, some stringing may occur. A quick pass with a lighter will remove them cleanly.
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (2)