Waste Chute H2D
Print Profile(1)
Bill of Materials
- Magnet 10x2 x 8:
Description
Due to limited space and by utilizing the door for the poop chute by @ Florian Lederer ( https://makerworld.com/en/@floriantelfs ), I built this poop chute ( https://makerworld.com/en/models/1460500-h2d-poop-chute-door?from=search#profileId-1522820 )
The chute is attached to the back of the H2D with magnets (10x2) and fits over the poop chute door. The function of the door is not restricted by this cover and an additional thermal bridge is created. A container can then be placed under the chute, or a hose can be installed to lead directly into a trash can or collection container.
My first print attempt was unfortunately not correctly connected, so I had to help a little with glue. But this has already been corrected. Otherwise, both parts are connected with superglue (I use ARKA Kraftprotz) and then assembled
I printed the chute in PLA and that will be sufficient for this purpose
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (0)